Top: Constructed of 14 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top.
Frost Top: Constructed of 14 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. The top is formed to stand 1″ above the counter top and is provided with a 1/2″ full perimeter gutter to collect melted condensate; a 1″ IPS drain is provided. The frost top has copper tubing firmly soldered to the exterior bottom.
Insulation: The pan is fully insulated with high density fiberglass and polystyrene, 1-1/2″ thick, and enclosed with an 18 gauge galvanized steel outer liner. The entire unit is removable without the use of tools.
Refrigeration Series (WCM Series Only): The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit provided with a hermetically sealed compressor. The system is fully charged with CFC-free refrigerant cap tube, filter drier, and on/off switch provided—and ready to operate.
Note: Proper ventilation must be provided in counter.
Electrical (WF Series Only): The unit will be wired for 15 amp, 120 volt, single phase operation with an on/off switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.
