Top: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring the counter top.
Liner: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4″ radius on the horizontal edges and a minimum 3/4″ radius on the vertical edges. The liner has copper tubing firmly soldered to the exterior sides and bottom. The unit is provided with an all stainless steel insulated, hinged, life off lid, with plastic coated pulls.
Insulation: The unit is fully insulated with high density polystyrene, 2-1/2″ thick on all sides, and enclosed with a 22 gauge galvanized steel outer liner.
Refrigeration: The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.
Note: Proper ventilation must be provided in counter.
Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6′-long, 3-wired cord and plug (NEMA 5-15P) will be provided.
